Dialing During A Connected Call - Aastra DT690 User Manual

1. Press More, mark New Call, and press Select.
This will put the first call on hold.
2. Dial the number, and press
When the third party has answered, continue with the following to establish a
conference:
3. Press More, mark Conference and press Select.
4. Repeat the procedure to add more conference members.
Note: A tone burst is heard each time a participant enters or leaves the
11.10

Dialing During a Connected Call

When calling interactive teleservices, for example telephone banks, you need
to use Dual Tone Multi Frequency (DTMF) signals. If the phone exchange is not
already programmed to automatically convert entered digits into DTMF signals,
this function needs to be activated during the call.
To dial digits during a connected call, do the following:
1. Press 9 or More.
2. Enter the required digits.
Entered digits are transferred as DTMF signals.
Note: In Finland, press 1 and enter the required digits.
1424-EN/LZT 103 088 Uen A2 2008-11-21
Note: You can also press 3.
conference. When the conference leader leaves the conference,
the conference will continue with the other included parties. The
conversation is changed back to a normal two party connection when
there is only two parties left.
• If pressing More, select DTMF, and press Select.
.
During Calls
63