Clearing Paper Jams; Affecting Print Quality; Moving The Printer - Tektronix Phaser 600 Service Manual

4
Key Operator Training

Clearing paper jams

Affecting print quality

Moving the printer

4-4 Phaser 600 Color Printer
Show the location of the paper exit release lever and the surfaces that
will require cleaning inside the exit cover.
Media jam locations: Show the possible locations for media jams: inside the top
cover, under the back-tension blade, at the stripper fingers, at the fuser/exit.
Show the location of the jam-clearing information in the user manual.
Demonstrate how to move the printhead back to its home position, if
it should be located behind the drum when a jam occurs. Stress that a
jammed media should not be removed until the printhead is safely in
its home position.
Increasing RAM memory: Explain the advantages of using more RAM in the
printer to improving print times.
Using TekColor color corrections: Explain that different color correction modes
are available and where to find more information in the user manual.
Explain how fusing (hot, cold or none) affects print quality and durability on
different media.
Printhead restraint: Explain the importance of powering down the printer
using the power switch and installing the printhead restraint (shipping block)
before moving or shipping the printer. Failure to properly lock the printhead
can result in serious damage to the printer.
Show where this is explained in the user manual.
Allow the inks in the printhead to solidify (about 15 minutes) before
moving or tilting the printer.
Demonstrate how to empty the waste bin.