The Diagnostic Pull-Down Menus Summary - Tektronix Phaser 600 Service Manual

The diagnostic pull-down menus summary

All of the functionality in the user interface is accessible from the menu bar.
Some of the functions are additionally available via "accelerator" key (Alt- key)
synonyms. The following discusses the pull-down menus, as they appear, left to
right.
Test Command (Alt-T)
Opens the test selection window.
View Menu
Provides for changing various screens and major modes of operation for the
program.
"PostScript Processor" – switches to the processor window to show
results of test running on the processor.
"Erase Screen" – erases all the characters from the currently selected
window; it has no affect on the test running.
"Printer Info." – brings up a window summarizing information about
the printer currently connected to the diagnostics.
"Debug" Check List Item – enables or disables a trace of all I/O
between the user interface and the 29K; it is off by default.
"Test Stats" – lists the status of the last test sequence to run
Run Command
Executes a test sequence.
Next Command
Stops the currently running test and immediately starts the next test.
Stop Command
Stops the currently running test and stops the sequence in progress.
Troubleshooting
Service Manual 6-37
6