Repacking And Moving The Printer; Before You Begin; Emptying The Waste Bin Before Moving The Printer - Tektronix Phaser 600 Service Manual

Repacking and moving the printer

Before you begin

Cables and media
Ink loader

Emptying the waste bin before moving the printer

1. Empty the waste bin as described below; then turn the printer off.
2.
Let the printer cool down for 7 minutes before you move it so that the
ink has time to solidify.
1. Remove the power cord and any network cables.
2. Open the paper cover and lift out the paper roll.
3.
Remove the paper roll from the holder and repack the paper roll in its
original shipping box.
4. Re-insert the empty paper roll holder into the printer; close the paper
cover.
1.
Open the ink loader cover and remove any unused ink sticks.
2. Use an alcohol swab to clean inside the ink loader.
3. Detach the ink loader from the printer and repack it in its original
shipping box.
The printer locks the waste bin in place until it needs emptying. However, you
can use the Utilities — Unlock Waste Bin menu item to unlock the waste bin so
that you can empty it before the front panel message prompts you to do so.
1.
When the printer is on and the Ready message appears in the front
panel, access the Utilities menu by pressing the Menu button, then an
arrow button until you see this message:
Utilities
<--- --->
2. Press the Menu button.
3.
Press an arrow button until you see this message:
Unlock Waste Bin
<--- --->
4. Press the Select button to unlock the waste bin.
Menu
Select
Cleaning and Maintenance
Service Manual
7
7-17