Tektronix Phaser 600 Service Manual page 222

8
Field Replaceable Unit Disassembly/Assembly
Left and right printhead sensors
8-50 Phaser 600 Color Printer
1.
Turn off the printer. Leave the power cord plugged in to provide a
discharge path for static electricity.
2. Remove the right cover as detailed in the topic, "Right cover" on
page 8-4.
3. Disconnect the left and right printhead sensors' wiring harnesses from
the carriage board. Clip the tie wraps securing the harnesses to the
other printhead wiring harnesses.
4. Free the sensors from their plastic mounting brackets on either side of
the printhead.
Disconnect
wiring
harnesses
Figure 8-38 Removing the left and right printhead sensors
Reverse these steps to install the left and right printhead sensors.
Left & right
printhead sensors
9482-61