Attaching The Ink Loader - Tektronix Phaser 600 Service Manual

2
Installing the Printer and Drivers

Attaching the ink loader

2-12 Phaser 600 Color Printer
1.
Remove the ink loader from its packaging.
2. Remove the thumbscrew from the back of the printer where the ink
loader will install.
3. Pull back the four sliders as shown.
4.
Insert the ink loader into the printer.
5. At the rear of the ink loader, insert the thumbscrew into the opening to
secure the ink loader to the printer; tighten the screw.
1
2
Figure 2-6 Installing the ink loader
3-2628-14