Back Tension Blade And Paper Clamp - Tektronix Phaser 600 Service Manual

Back tension blade and paper clamp

Clean the back tension blade and paper clamp when you notice streaks on your
print.
Setting the front panel for cleaning
1. On the printer's front panel, press the Menu button; the printer
displays this message:
Help Pages
<---- ---->
2.
Press the arrow button ( ---> ) until you see this message:
Utilities
<---- ---->
3. Press the Menu button; the printer displays this message:
Test Print
<---- ---->
4. Press the arrow button until you see this message:
Clean Paper Clamp
<---- ---->
5. Press the Select button. This places the printer in a "neutral"
position:
Fuser shuttle is positioned to the right for easy access.
Back tension blade is loosened.
Paper clamp is raised.
The front panel displays: Open Top Cover .
Cleaning the back tension blade
Warning
The back tension blade, the steel belt behind it, and the paper clamp
are very sharp. Make sure that you use the cleaning tool and keep
your hands away from the blade and belt.
Note For better visibility, you can pull the printer away from the wall to
access it from behind. If this is not possible due to space limitations,
you can use a mirror to see exactly where you are cleaning with the
tool.
1. Moisten a lint-free cloth with 90% pure isopropyl alcohol (or use a
pre-soaked alcohol cloth).
Cleaning and Maintenance
Menu
Menu
Menu
Select
Service Manual
7
7-3