Clearing Paper Jams; Affecting Print Quality; Moving The Printer - Tektronix Phaser 360 Service Manual

Clearing paper jams

Affecting print quality

Moving the printer

Media jam locations: Show the four possible locations for media jams: inside
the exit cover, inside the front cover, at the manual feed slot, at the media tray.
Show the location of the jam-clearing information in the user manual.
Printing transparencies using a paper tray: The printer tries to make the print
the customer requests. If paper is loaded in the printer, and the customer
requests, via the print driver, a transparency, then the printer indicates that
transparency film must be loaded and waits for the customer to do so.
Show where this is explained in the user manual and where to find the
Tektronix order number for the transparency tray.
Using TekColor color corrections: Explain that different color correction modes
are available and where to find more information in the user manual.
Transit restraint: Explain the importance of powering down the printer using
the power switch and locking the transit restraint before moving or shipping the
printer. Failure to properly lock the print head can result in serious damage to
the printer.
Show where this is explained in the user manual.
Remove the maintenance tray. Don't ship or tilt the printer with the
maintenance tray installed inside.
Never ship a used maintenance tray. Explain that due to the
oil-saturated wick bar the maintenance tray is unwise to attempt to
transport the maintenance tray. The oil in the maintenance tray can be
messy if the tray is tipped or left tilted.
Allow the inks in the printhead to solidify (about 30 to 45 minutes)
before moving or tilting the printer.
Key Operator Training
Service Manual 4-5
4