Menu Button; Names And Functions Of Parts; Front Panel - Sanyo DSR-M810PA Instruction Manual

2

NAMES AND FUNCTIONS OF PARTS

Front panel

13
1. POWER indicator
Lights when the power is ON.
Flashes when there is a problem with the hard disk or fan.
( P.10)
2. [TIMER] button and indicator ( P.14)
If this button is pressed while recording is stopped, the digital
video recorder enters timer recorder standby and the indicator
lights up. When the set time arrives, the digital video recorder
starts timer recording.
3. [SEARCH] button and indicator ( P.18)
When the button is pressed while recording or stopped, the
indicator lights, and the search setting screen appears.
4. [MENU] button and indicator
Used to display the menu screens (setting screens). The
indicator lights when a menu screen is displayed.
5. [REVIEW] button
When pressed during playback, lets you rewind the image.
Also used for menu screen operations.
6. [ ] button
Used to move the cursor in menu screens up. Also used to
change setting values.
7. [ ] button
Used to move the cursor in menu screens down. Also used to
change setting values.
8. [CUE] button
When pressed during playback, lets you fast-forward the
image. Also used for menu screen operations.
9. [EXIT/OSD] button
Returns to the normal screen when the main menu or a sub-
menu is displayed.
10. [PLAY/STOP] button and indicator
Plays back the normal image (indicator lights). When pressed
during playback, stops playback.
English
1 2 3 4 5
POWER
SEARCH
MENU REVIEW
TIMER
MENU RESET
FULL
LAN
(LINK/ACT.)
14 15
6 7 8 9 10
PLAY/
STOP
EXIT/OSD
CUE
STILL
LOCK/REMOTE
USB
16 17
11. ALARM indicator
Flashes when recording an alarm image.
12. [REC/STOP] button and indicator
Starts normal recording. Indicator lights during recording.
During recording, pressing the button for at least 3 seconds
stops recording and turns off the indicator.
13. FULL indicator ( P.14)
Lights when the remaining memory in the hard disk's
recording area has reached zero and recording has stopped.
14. LAN indicator
Lights when the digital video recorder is connected to a
network. Flashes when data is being sent and received.
15. [MENU RESET] button ( P.24)
Used to initialize the currently displayed menu settings, and to
set the time.
16. [STILL] button and indicator
When pressed during playback, freezes the screen image (the
indicator lights). Pressing the button again resumes playback.
17. USB terminal ( P.21, P.43)
Used to connect a CompactFlash card reader or CD-R/RW
drive.
18. LOCK/REMOTE indicator ( P.23, P.38)
Lights when operations have been locked by the key lock or
security lock setting.
If an operation button other than [MENU] button is pressed
when the security lock is set, a buzzer sounds. The key lock
cannot be set during playback.
The indicator flashes at 4Hz when there is a network
connection, and flashes at 1Hz when there is a network
connection while locked.
7
11 12
ALARM
REC/STOP
18