Table of Contents
Advertisement
1
NAMES AND FUNCTIONS OF PARTS
DSR-3716P
1
2
POWER
FULL
1
27
AUDIO
OUT
28
9
10
29
USB
Front panel
1.
POWER indicator
The POWER indicator will light up when the power is
turned on.
If the internal HDD or fan begins to malfunction, this
indicator will be flashed.
2.
FULL indicator
The FULL indicator will begin to flash when the amount of
available memory in the hard disk's normal recording area
drops to the percentage specified using menu settings.
In addition, recording will stop automatically when no more
memory is available, and the FULL indicator will switch to
a permanently lit condition.
This indicator can then be turned off by performing "AREA
FULL RESET" using menu settings.
3.
ALARM FULL indicator
The ALARM FULL indicator will begin to flash when the
amount of available memory in the hard disk's alarm
recording area drops to the percentage specified using
menu settings.
In addition, recording will stop automatically when no more
memory is available, and the ALARM FULL indicator will
switch to a permanently lit condition.
This indicator can then be turned off by performing "AREA
FULL RESET" using menu settings.
4.
LOCK indicator
The LOCK indicator lights up when operation has been
locked using <SECURITY LOCK SET>.
An alarm will be sounded if a button is pressed in this
condition. In addition, a password entry screen will be
displayed on the monitor at this time.
If the correct administrator password is entered, the lock
condition will be cancelled and the LOCK indicator will turn
off.
5.
ALARM indicator
The ALARM indicator flashes during alarm recording, and
it is lit up during pre-alarm recording.
English
3
4
5
ALARM FULL
LOCK
ALARM
2
3
4
5
6
7
8
12
13
11
14
15
16
6
8
7
9
12
13
14
15
16
MENU
EXIT/OSD
PLAY/STOP
MENU
ENTER
ZOOM
SEARCH
STILL
FUNC.
QUAD
MULTI
SEQUENCE
COPY SHUTTLE HOLD
PRESET
AUTO PAN
MON 2
PLUS
FOCUS
REC/STOP
TIMER
SEQUENCE
TOUR
18
19
10 11
21
22
6.
[CAMERA SELECT] buttons and indicators
When one or more cameras have been connected to the
VIDEO IN terminals on the digital video recorder's rear
panel and the appropriate [CAMERA SELECT] button is
pressed, the corresponding indicator lights up and the
video feed from that camera is displayed on-screen.
During quad, multi 9 or 16 screen display:
The indicators corresponding to the cameras being
displayed on the monitor are lit up.
If video is lost:
The indicator starts to flash.
If an alarm occurs:
The indicator for the corresponding camera starts to flash.
7.
[FUNC.] button and indicator
Switch to normal mode or camera control mode.
Press button for camera control mode and indicator will
light. Press button again to return to normal mode.
Indicator turns off.
8.
[QUAD] button and indicator
The [QUAD] button is used to display video in quad
screens, and the indicator will light up when this type of
display is being presented.
The QUAD indicator will turn off when a different screen
display mode is adopted.
9.
[MULTI] button and indicator
The [MULTI] button is used to display video in multi 9 or 16
screens, and the indicator will light up when this type of
display is being presented.
The MULTI indicator will turn off when a different screen
display mode is adopted.
The DSR-3709P can only display video in nine screens.
10. [MON2] button and indicator
If the [MON2] button is pressed while a monitor is
connected to the MON2 output terminal on the rear panel,
it will be possible to change the monitor 2 output video.
The [CAMERA SELECT] and [SEQUENCE] buttons can
be used, and the indicator will be lit up during the setting
procedure.
1
24
17
SHUTTLE
JOG
AF
CARD
IRIS
ALARM
MENU
MENU
RESET
EJECT
ZOOM/I/FO
PAN
23 20
25
26
Advertisement
Table of Contents
