Names And Functions Of Parts; Front Panel - Sanyo DSR-3506 Instruction Manual

2

NAMES AND FUNCTIONS OF PARTS

1
POWER FULL
1

Front panel

1. POWER indicator
The POWER indicator will light up in red when the power is
on.
If the internal HDD or fan begins to malfunction, this
indicator will be flashed.
2. FULL indicator ( P.61)
The FULL indicator will begin to flash when the amount of
available memory in the hard disk's normal recording area
drops to the percentage specified using menu settings.
In addition, recording will stop automatically when no more
memory is available, and the FULL indicator will switch to
a permanently lit condition.
This indicator can then be turned off by performing "AREA
FULL RESET" using menu settings.
3. ALARM FULL indicator ( P.61)
The ALARM FULL indicator will begin to flash when the
amount of available memory in the hard disk's alarm
recording area drops to the percentage specified using
menu settings.
In addition, recording will stop automatically when no more
memory is available, and the ALARM FULL indicator will
switch to a permanently lit condition.
This indicator can then be turned off by performing "AREA
FULL RESET" using menu settings.
4. LOCK indicator ( P.81)
The LOCK indicator lights up when operation has been
locked using <SECURITY LOCK SET>.
An alarm will be sounded if a button is pressed in this
condition. In addition, a password entry screen will be
displayed on the monitor at this time.
If the correct password is entered, the lock condition will be
cancelled and the LOCK indicator will turn off.
5. ALARM indicator
The ALARM indicator flashes during alarm recording, and
it is lit up during pre-alarm recording.
6. [CAMERA SELECT] buttons and indicators
When one or more cameras have been connected to the
VIDEO IN terminals on the digital video recorder's rear
panel and the appropriate [CAMERA SELECT] button is
pressed, the corresponding indicator lights up and the
video feed from that camera is displayed on-screen.
English
2 3 4 5
ALARM FULL LOCK ALARM
2 3 4 5 6
6
7 8 11 12 13
14 15
MENU EXIT PLAY/STOP
ZOOM SEARCH STILL
QUAD MULTI
SEQUENCE COPY SHUTTLE HOLD
MON 2 OSD
REC/STOP TIMER ALARM
17 18
9 10 20 21 22
During quad or multi 6 screen display:
The indicators corresponding to the cameras being
displayed on the monitor are lit up.
If video is lost:
The indicator starts to flash.
If an alarm occurs:
The indicator for the corresponding camera starts to
flash.
7. [QUAD] button and indicator ( P.16)
The [QUAD] button is used to display video in quad
screens, and the indicator will light up when this type of
display is being presented.
The QUAD indicator will turn off when a different screen
display mode is adopted.
8. [MULTI] button and indicator ( P.17)
The [MULTI] button is used to display video in multi 6
screens, and the indicator will light up when this type of
display is being presented.
The MULTI indicator will turn off when a different screen
display mode is adopted.
9. [MON2] button and indicator ( P.18)
If the [MON2] button is pressed while a monitor is
connected to the MON2 output terminal on the rear panel,
it will be possible to change the monitor 2 output video.
The [CAMERA SELECT] and [SEQUENCE] buttons can
be used, and the indicator will be lit up during the setting
procedure.
10. [OSD] button and indicator ( P.13)
Each time the [OSD] button is pressed while the digital
video recorder is recording, playing, or stopped, the
operation display area changes position between the top
or bottom of the screen or will become hidden;
furthermore, the indicator will light up whenever this
information is being displayed.
11. [MENU] button and indicator
The [MENU] button is used to display the menu screens
(i.e., setting screens), and the indicator lights up while any
of these screens is being displayed.
7
23
16
SHUTTLE
JOG
24
MENU
25
RESET
19