Querying Rectifier Status - Emerson ACTURA Flex 48330 User Manual

The 2
temperature sensor. The display will vary with different parameter settings (see 4.7
for parameter setting). If the temperature sensor is not connected or is faulty,
system will prompt invalid. Meanwhile, the 4
Sensor".

5.4 Querying Rectifier Status

The rectifier information includes the rectifier serial No., voltage, current, current
limit, mains situation, rectifier power limit and temperature power limit.
1. At any page of the system information, press "ENT" to enter the main menu.
2. Use "
press "ENT" to confirm.
3. Use "
Press "ENT" to confirm.
The information of every rectifier is displayed in two pages. The information in the
first page includes: rectifier serial No., output voltage and current, AC/DC on/off
state and AC input voltage. The information in the second page includes: rectifier
serial No., current limit, the states of "AC Derated" and "Temp Derated". Press "
to scroll to the next page, or "
4. Press "
At most 48 pieces of rectifier's information can be displayed. If the rectifier does not
exist, there will be no information. If the rectifier communication is interrupted, the
information will be displayed in high light.
nd rd
and 3 rows of the page are the temperature information detected by the
" or " " keys to select the "Status" sub-menu in the main menu, and
Status
" or " " to select the "Rect Info" submenu, as shown in the above figure.
Rect 1: 01234567
CurrLimit:
AC Derated:
Temp Derated: N
" or " " to query other rectifier's information.
ACTURA Flex 48330 Power System User Manual
th
row will display "Check Temp
Rectifiers
Active Alarm
Alarm History
Rect 1: 01234567
54.1V 30.2A
AC On DC on
AC Volt: 220V
34%
Y
" to return to the last.
Chapter 5 Operating SCU 39
"