Emerson ACTURA Flex 48330 User Manual page 4

Special Safe Requirements of This Equipment
The equipment has multi power inputs;
The equipment shall be installed on cement ground.
Others
1 Safety requirement
Please use the same model fuse to replace the fuse in the DC Power System.
2. Sharp object
When moving equipment by hand, wear protective gloves to avoid injury by
sharp object.
3. Cable connection
Please verify the compliance of the cable and cable label with the actual
installation prior to cable connection.
4. Binding the signal cables
The signal cables should be installed separately far away from heavy current
and high voltage cables, with distance at least 150mm.