Table 5-9 Password Levels And Authorities - Emerson ACTURA Flex 48330 User Manual

54 Chapter 5 Operating SCU
2. Use "
System will then prompt you to input the password.
3. Press "
digit by digit using "
setting submenu.
Users with different password levels have different authorities. See the following
table:
Level
User
Operator
Administrator
4. There are two pages of "Settings". Shift page by using "
the parameter by using "
As shown in the above figure, the monitoring module divides the parameters to be
set into 6 kinds: alarms parameter, battery parameter, AC parameter, DC parameter,
rectifier parameter and system parameter.
Among which, the battery parameters are divided into 5 kinds: basic, BLVD,
charging management, battery test, temperature coefficient, and they are displayed
in two pages, as shown below:
" or " " to select the submenu "Settings" and press "ENT" to confirm.
Enter Password:
123456
" or " " to select the number of password digits. Enter the password
" or " ". Press "ENT" to confirm and enter the parameter
Settings
Alarms Settings
Battery Settings
AC Settings
Parameter Set
DC Settings
Rect Settings
Sys Settings

Table 5-9 Password levels and authorities

Configuration of general parameters
User's authority, plus resetting system, resetting
password and modifying system type.
Operator's authority, plus modifying password of all
levels, controling alarm sound volume, browsing system
parameters that can be set only through the host
" or "
ACTURA Flex 48330 Power System User Manual
Authority
". Press "ENT" to confirm.
Default password
123456
654321
640275
" or " ", and select