Emerson ACTURA Flex 48330 User Manual page 77

There will be a prompt when resetting the system:
3. For administrator level password (by default: 640275), you can see the following
pages, besides all those above, as shown below:
You can change the value of "Change Password" and press "ENT" to confirm.
Use " " or " " to change the number, and "
right. Press "ENT" to confirm. You should input the same number twice to complete
the setting.
4. The value description of the parameters is listed below:
ACTURA Flex 48330 Power System User Manual
System Type:
48V/50A/300/NONE
Serial No:
2004051025252
Notice:
All Param Lost!
ENT Continue
ESC Quit
Change Password:
Code
Con Alarm Voice:
1 Hour
Serial:
12345689101112
SW Ver: 1.00
Set Enable: Y
Enter New PWD:
000000
Input Again!
Chapter 5 Operating SCU
" or " " to move the cursor left or
67