Other System Information Screen - Emerson ACTURA Flex 48330 User Manual

other shows hour, minute and second. The year is displayed with 4 digits; other
time units are in 2 digits.
Note
1. At this page, you may use "
2. If there has been no keypad operation for 8 minutes, the monitoring module will return to
the first system information page. The time of that return will be recorded automatically,
and can be queried through the host.

5.3.2 Other System Information Screen

The system information is shown in many pages. The default page of the
monitoring module after the system power on is the system information first page.
You can press "
as shown in the following page:
Battery information page
1. Battery 1, battery 2
They represent respectively the current of the battery that battery shunt 1 and shunt
2 is connected to. If the "Shunt Coeff" of a certain battery group is set to "No", this
situation will be reflected at the battery information page by "Not connected", and
no actual capacity will be displayed.
Note
There is only one current shunt in the system, that is "shunt 1".
10:09:16
53.5V
System: No alarm
Auto /BC
2004-09-16
53.5V
System: No alarm
Auto /BC
" and "
" or " " to scroll up or down to view more operation information,
Batt1: 295 A
Actual: 99.1%
Batt2:
Remain: 0%
ACTURA Flex 48330 Power System User Manual
Chapter 5 Operating SCU
125 A
125 A
" to adjust the LCD contrast (7-level).
0 A
37