Rectifier; Figure 1-4 Dimensions - Emerson ACTURA Flex 48330 User Manual

6 Chapter 1 System Description
One Ethernet output
One RS485 output
One console output for ECU debug
The connector board can be hot plug and has enough space for
accommodating all the interface cables.
The connector board should space the hollow to the SCU convection for air
flowing
The connector board is mounted in the room 1U×2U at the top of the SCU.
The shelf has a 1U×2U panel for the connector board.
One RS232 and Ethernet ports are located at the front of the connector board.
The shelf has two rails for supporting the connector board

1.5.2 Rectifier

Outline
The appearance and dimensions (unit: mm) of the rectifier are illustrated in the
following figure.
Weight: ≤3.5kg
Dimensions (H × W % D): 124.3mm % 84mm % 287mm
The functions of the indicators in front panel are listed in Table 1-3.

Figure 1-4 Dimensions

ACTURA Flex 48330 Power System User Manual