Table 5-20 Value Description Of Alarm Settings - Emerson ACTURA Flex 48330 User Manual

Use "
select the parameter value. Press "ENT" to confirm and save.
3. After setting the "Set DI Name" and confirming it, the system will prompt you to
name the DI:
Use "
right. Press "ENT" to confirm.
4. The value description of the parameter is listed below:
Parameter
56 names of alarm
Alarm Type
events
Critical, Major,
Level
Observation, None
Relate Relay Empty, No.1 ~ 8
DI No. No. 1 ~ 8
Alarm Mode High, Low
Set DI Name 1# ~ 8#
Figures or letters,
DI Name
10 at most
Clear His Alarm Y, N
Block Alarm Y, N
" or " " to select one page or one of the parameters, and "
" or " " to change the number, and "

Table 5-20 Value description of alarm settings

Range Default
Alarms of
different
types have
different
levels and
different
Relate
Relays
1
Low
1#
Digital
N
N
ACTURA Flex 48330 Power System User Manual
DI Name
Digital 1
Select those alarm events whose levels and relate relays
should be reset
There are different audible/visual alarm modes and callback
modes for alarm events of different levels
"Empty": The corresponding dry contact will not output alarm
information upon an alarm event
"No. 1 ~ 8": There will be a dry contact in the range of No.1 ~
8 that outputs the alarm information upon an alarm event
The 8 corresponding connecting terminals,
queued up in the order that the hardware
switches are put
"High": alarm upon high level;
"Low": alarm upon low level.
Set according to the actual situation
Serial No. of the connecting terminal for DI
input
When there are DI alarms, this parameter
shows the alarm name you have actually
defined. In the system with an AC sampling
board, you can define by yourself the DIs of
routes No.7 and No.8.
In the system without an AC sampling board,
you can define all DIs
"Y": Delete historical alarms
"Y": The active alarms will not be sent to the host (valid in
EEM protocol)
Chapter 5 Operating SCU
" or " " to move the cursor left or
Value description
71
" or " " to
Effective
only to
self-defined
DI alarms