Rack Mounting - Korenix JetPort 5208 User Manual

JetPort 5208 / JetPort 5216 User's Manual

Rack Mounting

The JETPORT 5208 / JETPORT 5216 can be mounted in a 1U system rack.
The mounting brackets can screw into either the front or the back of the
unit so that it can attach to the front or the back of the rack. To rack mount
the unit:
1. Remove the screws at the front or the rear, as shown in the diagram below.
Phillips head hex
M3 x 6
Phillips head hex
M3 x 6
2. Screw the mounting brackets into the sides of the unit at the front or the
rear, as shown in the diagram below.
Phillips head hex
M3 x 8
3. Slide the unit into the front or rear of the rack and secure it to the rack.
8
Phillips head hex
M3 x 8