Ssh; Terminal Session (Linux) - Korenix JetPort 5208 User Manual

JetPort 5208/5216 User's Manual

SSH

Terminal Session (Linux):

1. Open a terminal (command line) on your computer.
2. At the prompt, key in your JETPORT 5208 / JETPORT 5216 Username
and the JETPORT 5208 / JETPORT 5216's IP Address in the following
way:
SSH [username@IP Address]
Note: The default SSH port is 22. If that port is already being used, up to
16 additional users can log in by adding a port number (from 5100
to 5115) to the login command. For example:
SSH [username@IP Address] -P 5101
3. Press Enter
4. When you are prompted for a password, use your JETPORT 5208 /
JETPORT 5216 password.
Once an SSH connection to the device is established, the JETPORT
5208 / JETPORT 5216 Main Menu comes up:
This menu is the same as the main menu that appears with Telnet sessions (see
p. 41 for Telnet operation).
62