Date / Time - Korenix JetPort 5208 User Manual

Date / Time

The Date / Time function allows you to set the JETPORT 5208 / JETPORT
5216's date and time. When you click the Date / Time icon, the following
dialog box appears:
The date and time that the JETPORT 5208 / JETPORT 5216 is currently set
to appear in the upper section. The large lower section offers three methods to
set new date and time parameters:
Synchronizing the date and time with your computer's date and time
Setting the date and time manually
Synchronizing the date and time with the date and time of an NTP
server on the internet
Note: 1. If you enable Synchronize with computer time, the Date and Time
fields are filled with the date and time settings of your computer.
2. If you enable Set Manually, key in the Date and Time in the
corresponding fields.
3. If you enable Synchronize with NTP server, select the time zone
that corresponds to the JETPORT 5208 / JETPORT 5216's
location from the list box in the Time Zone panel. If you are
behind a firewall, you must enable a port for the NTP server.
Click Save to save your changes.
Chapter 4. Administration
2