Port List - Korenix JetPort 5208 User Manual

Port List

This list displays the port information of the selected target (only one target can
be selected at a time).
The left column lists the target's port numbers, the second column shows
the COM port it is mapped to (if any), the third column shows its working
mode, and the right column shows its status.
Note: The working mode refers to the setting for the port that was
specified when the port was configured. See Port Config for
details.
Double clicking a port in the Port List brings up a Port Mapping dialog
box that lets users select the number of COM ports they wish to map (i.e.,
Real COM ports they wish to install). Only ports designated as Real Port
ports can be mapped. See Port Mapping for mapping details.
Note: The Port Mapping dialog box can also be invoked either by clicking
MapTo... on the toolbar or selecting MapTo... from the menu.
Chapter 7. Virtual Port Management
69