PPP (Dial In) Connection
This type of connection works directly through the COM port.
Direct PPP Connection
Setup:
To set up a direct PPP connection, do the following:
1. Use Ethernet to Serial cable to connect one of the JETPORT 5208 /
JETPORT 5216's serial ports to a COM port on a PC (refer back to the PC
Installation section, if necessary).
Note: 1. In the examples that follow we use COM1. If you use a different
COM port, change the settings accordingly.
2. On your PC, run the Make New Connection setup program:
Start
Programs
Make New Connection
The following dialog box appears:
3. Key a descriptive name for the connection in the top text box; select
Standard 28800 bps Modem for the device; then click Configure.
Chapter 6. Out of Band Operation
Accessories
Communications
55