Korenix JetPort 5208 User Manual page 63

7. In the Advanced Connection Settings dialog box enable Use flow control;
select Hardware (RTS/CTS); then click OK to return to the Connection
page.
8. Click OK (at the bottom of the Connection page; then click Next. The
following dialog box appears:
9. Key in anything you like for these fields, then click Next.
10. Click Finish.
A new icon that you can use to connect to the JETPORT 5208 / JETPORT
5216 is created in the Dial-up Network folder. This completes the Direct
Dial In setup.
Chapter 6. Out of Band Operation
57