Final Check - Korenix JetPort 5208 User Manual

This completes the HyperTerminal setup. For Windows NT, 2000, XP and
Windows Server 2003 systems, a HyperTerminal icon that connects you to the
JETPORT 5208 / JETPORT 5216 is created on the desktop. For Windows 98
and ME, you must access HyperTerminal from the Windows Start Menu.

Final Check:

To make sure that the modem and COM port are correctly installed:
1. Open the Control Panel:
My Computer Control Panel
2. Open the Make New Connection folder.
If all went well, you should see an entry with the name you assigned for
this connection.
3. Open the Device Manager:
My Computer Control Panel
Manager
Your Modem and Ports entries should look similar to the image below
Chapter 6. Out of Band Operation
System Device
.
53