Korenix JetPort 5208 User Manual page 55

4. For the Connect using: field, select Direct to COM1 (assuming you are
using COM1 on your PC), then click OK. A Port Setting dialog box
similar to the one below comes up:
5. For OOBC connections, the JETPORT 5208 / JETPORT 5216's serial
port settings and the computer's COM port settings must be the same.
Change the settings in your dialog box (if necessary), so that they match
the JETPORT 5208 / JETPORT 5216's Console Port settings (see Port
Config for details), then click OK.
Note: The JETPORT 5208 / JETPORT 5216's default settings are 9600
bps; 8 Data bits; No Parity; No Stop bits, but you can change these to
something more suitable to your installation as long as they both
much.
Chapter 6. Out of Band Operation
49