Administrator Login Failure - Korenix JetPort 5208 User Manual

Administrator Login Failure

If you are unable to perform an Administrator login (because the Username and
Password information has become corrupted, or you have forgotten it, for
example), you can clear the login information with the following procedure:
1. Power off the JETPORT 5208 / JETPORT 5216 and remove its housing.
2. Short the jumper labeled J6.
3. Power on the switch.
4. When the Link and 10/100Mbps LEDs flash, power off the switch.
5. Remove the jumper cap from J6.
6. Close the housing and start the JETPORT 5208 / JETPORT 5216 back up.
After you start back up, you can use the default Username and Password
to log in.
Appendix
75