Property Settings - Korenix JetPort 5208 User Manual

Property Settings:

To set up the serial communications parameters for a port, select it, then click
the Property Settings button at the bottom of the page:
The meanings of the settings are given in the following table:
Setting
Port ID Each port on the JETPORT 5208 / JETPORT 5216 has a
port ID number (COM1 - COM8 for the JETPORT 5208, or
COM1 - COM16 for the JETPORT 5216). The Port ID field
displays the number of the port that is being configured.
Port Name You can give a port an appropriate name by editing the Port
Name field.
Serial Parameters The serial parameter fields allow you to set up the port so
that the JETPORT 5208 / JETPORT 5216 can communicate
(Data Bits - Out CRLF
with the device connected to it. Choose the parameters so
Translation)
that they match the ones for the connected device.
Suspend Character The Suspend character is used to bring up the Suspend
Menu in Telnet sessions.
Chapter 4. Administration
Meaning
(Continues on next page.)
2