Telnet; Logging In - Korenix JetPort 5208 User Manual

Telnet

Logging In

1. On your computer, open a terminal (command line) session.
2. At the prompt, key in the JETPORT 5208 / JETPORT 5216's IP Address
in the following way:
telnet [IP Address]
Note: The default telnet port is 23. If that port is already being used, up to
16 additional users can log in by adding a port number (from 5000
to 5015) to the login command. For example:
telnet [IP Address]5001
3. Press Enter.
The following screen appears:
4. At the login prompt, provide your Username and Password.
Note: If you cannot see the login prompt click Terminal/Preferences on the
telnet session's menu bar, then select VT-100/ANSI.
Once a Telnet connection to the device is established, the JETPORT 5208 /
JETPORT 5216 Main Menu comes up. See p. 41 for Telnet operation.
Chapter 6. Out of Band Operation
61