Overview
The JETPORT 5208 / JETPORT 5216 offers Real COM Port support.
Devices connected to this type of Real port appear as if they were directly
connected to a COM port on the local computer. Data transmission between
the device and the local computer takes place over the Real COM port to the
JETPORT 5208 / JETPORT 5216.
This mode is useful with serial devices such POS terminals, Bar Code Readers,
Serial printers, etc. In addition, this mode can be used with other Korenix
management products.
Driver Installation
In order to utilize Real COM port management, the Korenix Real COM port
driver must be installed. To install the driver, do the following:
1. On the software CD that came with your JETPORT 5208 / JETPORT
5216 package, locate the file: Real_Port_vxxx.exe
Note: The vxxx specified above stands for the driver's version number. The
file on the CD will show an actual version number.
2. Double click the filename to start the installation. The Setup screen appears:
Click Next to move on.
Real Port Management
Chapter 7
65