Korenix JetPort 5208 User Manual page 24

JetPort 5208/JetPort 5216 User's Manual
To have the Station obtain its IP address automatically from a DHCP server:
1. Put a check in the Obtain an IP address automatically [DHCP] checkbox.
2. Enable the Enable report from the following SMTP server checkbox, and
key in the IP address of your SMTP server.
3. If your server requires authentication, put a check in the My server
requires authentication checkbox.
4. Key in the appropriate account information in the Account Name,
Password, and From fields.
5. Key in the email address of where you want the report of the DHCP
address sent to in the To field.
6. When all of your configuration settings have been made, click Update to
save the information and have the JETPORT 5208 / JETPORT 5216's
DHCP generated IP address emailed to you.
Note: If the JETPORT 5208 / JETPORT 5216 is on a network that uses
DHCP to assign network addresses, and you don't know what the
address is, there are several methods you can use to ascertain it..
1