Method 2 - Korenix JetPort 5208 User Manual

4. Select either Obtain an IP address automatically (DHCP), or Specify an
IP address. If you chose the latter, fill the IP Address, Subnet Mask, and
Gateway fields with the information appropriate to your network.
5. Click Set IP.
6. After the IP address shows up in the Device List, click Exit to end the
program.

Method 2:

1. Set your computer's IP address to 192.168.10.XXX
Where XXX represents any number or numbers except 10. (192.168.0.10 is
the default address of the JETPORT 5208 / JETPORT 5216.)
2. Specify the switch's default IP address (192.168.10.2) in your browser, and
you will be able to connect.
3. Assign a fixed IP address for the JETPORT 5208 / JETPORT 5216 that is
suitable for the network segment that it resides on.
4. After you log out, be sure to reset your computer's IP address to its original
value.
Appendix
77