Session Info - Korenix JetPort 5208 User Manual

Chapter 4. Administration
If no IP addresses are specified on this page, anyone can open a TCPIP Telnet
session to a RAW TCP port by specifying the IP address and port number of
the port – without having to specify a Username and Password.
Once specific IP addresses are entered here, however, only users logging in to
the JETPORT 5208 / JETPORT 5216 from one of those IP addresses can
have access to the RAW TCP ports without having to specify a Username and
Password.
Note: The port must be designated as a RAW TCP Port under the Port Config
settings. See Operating Mode.

Session Info

Clicking the Session Info button brings up the Active Sessions display:
This display lets the administrator see at a glance all the users currently logged
into the JETPORT 5208 / JETPORT 5216, and provides information about
each of their sessions. It also gives the administrator the option of forcing a
user logout by selecting the user and clicking End Session.
3