Logging In - Korenix JetPort 5208 User Manual

8. Change the settings (if necessary), so that they match the settings shown in
the dialog box, then click OK.
9. Close the HyperTerminal Window. When Windows asks if you want to
disconnect, click Yes. When Windows asks if you want to save the session,
click Yes.
This completes the HyperTerminal setup. For Windows NT, 2000, XP and
Windows Server 2003 systems, a HyperTerminal icon that connects you to the
JETPORT 5208 / JETPORT 5216 is created on the desktop. For Windows 98
and ME, you must access HyperTerminal from the Windows Start Menu.

Logging In:

1. Double click the HyperTerminal icon on your desktop.
2. In the VT100 terminal window, key in:
[Ctrl + D]
A login prompt appears.
3. Key in your Username and Password to bring up the JETPORT 5208 /
JETPORT 5216's main menu.
Chapter 6. Out of Band Operation
51