SECTION 4: USING THE OSD MENUS
Clear all the patterns. Enter CLEAR PATTERN menu, then click IRIS+ to delete all the defined patterns.
•
4.8 Configuring Time Tasks
A time task is a preconfigured camera action configured to perform automatically at the specific time.
4.8.1 TASK 1: Set time tasks
You can configure up to 8 tasks. To configure a time task:
Open the TIME TASK submenu: Go to MAIN MENUS g DOME SETTINGS g TIME TASK
1.
2.
Choose the task number.
Move the cursor to TASK NUM and click IRIS+ to enter edit mode.
a.
b.
Click the up and down direction buttons to select the task number you want to configure.
c.
Click IRIS+ again to confirm and exit edit mode of this column.
3.
Set the task status.
Move the cursor to TASK STATE and click IRIS+ to enter edit mode.
a.
b.
Click the up or down direction buttons to set the task status to ON.
Click IRIS+ again to confirm and close the menu.
c.
4.
Configure the task action.
40
Time Task configuration menu