Set The Dwell Time When Running A Fast Patrol; Configuring Patterns; Task 1: Set A Pattern - Observint BLK-PTZ36XIR User Manual

SECTION 4: USING THE OSD MENUS

4.6.5 Set the dwell time when running a fast patrol

If you call preset 46 to enable the fast patrol, the camera will run the patrol automatically according to the route. Also, you can set
the time a patrol pauses (dwell time) on a preset before switching to the next preset. Select either 5S, 10S, 20S, 30S, or 60S.

4.7 Configuring Patterns

A pattern is a memorized, repeatable series of panning, tilting, zooming and preset movements that can be recalled by a command
or automatically performed by a configured function (alarm, park, time task, and power-up).

4.7.1 TASK 1: Set a pattern

You can configure up to 4 patterns. To set a pattern:
Open the PATTERNS submenu. Go to MAIN MENUS g DOME SETTINGS g PATTERNS
1.
2. Choose the pattern number:
a. Move the cursor to PATTERN NUM and click IRIS+ to enter edit mode.
b. Click the up and down direction buttons to select the number of the pattern you want to configure.
Click IRIS+ again to confirm.
c.
3. Edit the pattern.
Move the cursor to EDIT PATTERN and click IRIS+ to enter edit mode.
a.
38
Patterns configuration menu