Basic Operations; System-Defined Presets - Observint BLK-PTZ36XIR User Manual

SECTION 3: GETTING STARTED

3.1.1 Basic operations

You can control the camera using a device such as a control keyboard, DVR, or DVS. In this and the following chapters, operation of
the camera by the IE browser connected to a DVR will be used.
Ensure that the communication settings and address for the camera are configured properly in the controlling device.
NOTE
Panning and tilting: Click the direction buttons to control the movement of the camera.
Zooming: Click the ZOOM in/out buttons to control the zooming.
Focusing: Click the FOCUS+ and FOCUS- buttons to adjust the focus.
Iris: Click the IRIS+ and IRIS- buttons to adjust the iris.

3.2 System-defined Presets

The camera system includes special functions that can be initiated by calling a preset number through a control device such as a
DVS. These presets are fixed and cannot be edited. To call the system-defined presets remotely, you can choose the preset number
from the list in the PTZ control panel. For instance, preset 99 is the Start auto scan. If you call preset 99, the camera starts the
auto scan function. The table below lists the preset numbers and functions defined for the system.
Table 2. System-defined presets
Preset No.
33
34
35
36
37
38
39
40
41
42
43
44
46
92
16
Function
Auto-flip
Return to home position
Patrol 1
Patrol 2
Patrol 3
Patrol 4
IR cut filter in
IR cut filter out
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Enable fast patrol
Enable limit stops
Preset No. Function
93 Set manual limit stops
94 Remote reboot
95 Access main menu
96 Stop scanning
97 Start random scanning
98 Start frame scanning
99 Start auto scanning
100 Start tilt scanning
101 Start panorama scanning
102 Patrol 5
103 Patrol 6
104 Patrol 7
105 Patrol 8