5.
Remove the protective tape from camera.
2.3 Connecting the cables
1.
Route network cables for video, 24 Vac power and ground, and RS-485 between the remote control device and power source
and your camera. Do not apply power to the 24 Vac cables before connecting them to your camera.
Camera
2.
Connect the network power and ground, RS-485, and video cables to the camera drop cable connectors.
Protective
tape
Remove protective tape
Remote control device (DVR)
Network cabling
36x PTZ IR Outdoor Camera User Manual
SECTION 2: INSTALLATION
Monitor
13