Configuring System Information; Checking System Information; Configuring System Parameters - Observint BLK-PTZ36XIR User Manual

SECTION 4: USING THE OSD MENUS

4.2 Configuring System Information

4.2.1 Checking System Information

System information menu displays the current system information of the camera including the model, address, protocol, etc. The
information shown on this submenu is similar to the system information shown after camera power-up.
To open the system information display menu, go to MAIN MENUS g SYS INFO
System Information
The SYS INFO display is presented for Information only. It cannot be edited directly.
NOTE

4.2.2 Configuring system parameters

You can check and edit the system information including software address, baud rate, system time, etc. on the system information
settings menu.
To enter the system information settings menu, go to MAIN MENUS g DOME SETTINGS g SYS INFO SETTINGS
20