3.2.1 Manchester code control protocols
For Manchester code control protocol, the system-defined presets with special functions are shown as below.
Table 3. System-defined Presets of Manchester Code Control Protocol
Preset No.
65
66
69
70
71
72
3.3 On Screen Displays
The camera supports following on screen displays:
Zoom: Identifies the amount of magnification. The format is ZXXX. where "XXX" is the zoom amount.
PT Show: Displays panning and tilting direction, with the format of NEXXX TYYY, where "XXX" indicates the degrees in
north east (NE) direction, and "YYY" indicates the degrees in tilt position.
Time: Displays Day/Month/Year/Day and Week/Hour/Minute. It supports 24-hour time format.
Zone Show: Display the zone title.
Address Show: Display the address of the camera.
Error Rate Show: Display the error rate of the camera.
Fan and Heat show: Display the heat information of the camera.
Function
Remote reboot
Access main menu
Stop programming pattern
Record Pattern 1
Record Pattern 2
Record Pattern 3
SECTION 3: GETTING STARTED
Preset No.
Function
67
Auto-flip
70
Run Pattern 1
71
Run Pattern 2
72
Run Pattern 3
36x PTZ IR Outdoor Camera User Manual
17