Table of Contents
Advertisement
SECTION 4: USING THE OSD MENUS
Click IRIS+ again to save the pattern and exit edit mode.
c.
REMAIN MEMORY indicates the remaining memory of the camera for configuring patterns. When it reaches 0, no more patterns can be
•
NOTE
configured. You can also see the remaining memory shown under PATTERNS menu as REMAINING.
Panning/tilting movements and lens operations cannot be memorized simultaneously.
•
4.7.2 TASK 2: Preview a pattern
To preview a pattern, open the <PREVIEW PATTERN> menu to see the current pattern.
4.7.3 TASK 3: Delete patterns
To delete a selected pattern, click IRIS+ to enter <PATTERN SETUP>. When you see DEL PATH ABOVE, click IRIS+ to
•
delete the pattern.
To clear all the patterns, open the <DELE PATTERN> menu, then click IRIS+ to delete all the defined patterns.
•
4.7.4 TASK 4: Call the defined pattern.
Through a web browser connected to a DVR, select the corresponding preset number from the drop-down preset list in the control
panel, then click the arrow to call the related pattern. For example, call preset 41 to call pattern 1.
4.8 Configuring Time Tasks
A time task is a scheduled camera action configured to perform automatically at the specific time.
4.8.1 TASK 1: Set time tasks
You can configure up to 8 time tasks. To configure a time task:
Open the TIME TASK submenu: Go to MAIN MENUS g DOME SETUP g TASK SETUP
1.
36
Advertisement
Table of Contents
