SECTION 4: USING THE OSD MENUS
IR correction settings. This parameter is used to correct focus problems caused by IR light. You can set the IR CORRECTION
4.
to ON or OFF.
4.3 Configuring Image Parameters
You can set the camera parameters including focus, shutter speed, iris, etc. Configuring image parameters for the camera includes
several tasks (see below). To open the camera parameters settings menu, go to MAIN MENUS g DOME SETUP g CAMERA
SETUP.
4.3.1 TASK 1. Configure the focus settings
Setting the focus mode
•
Move the cursor to FOCUS using the direction buttons and click IRIS+ to change the cursor to hollow.
a.
26
Camera settings