Table of Contents
Advertisement
You can set up to 254 presets for the camera.
•
NOTE
The system-defined presets are displayed on this submenu; they are not editable.
•
3.
Set the preset position.
Move the cursor to PRESET PTZ and click IRIS+ to edit the preset position.
a.
Use the direction buttons to move the camera to find the desired scene/position, and then press IRIS+ to confirm the
b.
settings and return to the previous menu, or press IRIS- to cancel.
The preset position settings are restricted by limit stops if they are defined.
NOTE
4.5.2 TASK 3: Call the presets
a.
Through a web browser connected to an encoder, select the preset number from the drop-down preset list.
b.
Click the arrow to call a user-defined or system-defined preset.
4.5.3 TASK 2: Clear the preset settings
To clear the preset setting, move the cursor to CLEAR PRESET, then click IRIS+ to clear the settings of the preset.
4.6 Configuring Patrols
A patrol is a memorized series of preset function. It can be set and previewed on the patrol settings interface.
4.6.1 TASK 1: Set a patrol
You can configure up to 8 patrol numbers.
1.
Open the patrol configuration submenu. Go to MAIN MENUS g DOME SETTINGS g PATROLS
SECTION 4: USING THE OSD MENUS
36x PTZ IR Outdoor Camera User Manual
35
Advertisement
Table of Contents
