Observint R8VTHS Quick Installation Manual

R8VTHS 8 MP 4-in-1 HD Varifocal 150 ft IR
Turret Camera Quick Installation Guide
This 8 MP HD-TVI turret security camera captures sharp high definition video images with its high-
performance CMOS sensor and 2.8 ~ 12 mm varifocal lens. This camera features:
3840 × 2160 (8 MP) progressive scan CMOS sensor
•
2.8 mm ~ 12 mm varifocal lens providing a 105.94°(W) ~ 29.76°(T) horizontal field of view
•
Switch selectable TVI, AHD, CVI or CVBS video signal format (4-in-1)
•
IR range up to 150 feet
•
D-WDR DIgital Wide Dynamic Range
•
IP66 weatherproof rating
•
Trim ring
Enclosure
Zoom
adjust
Turret
R8VTHS camera assembly
Holes for
mounting
screws (3)
Camera (camera assembly without trim ring) top view
www.observint.com
1
Drop cable
Lens
Focus
adjust
Light
sensor
Clip plate
and screw
Format
Switch
Setting
What's in the box
Camera assembly
•
Mounting hardware
•
Drill template
•
Quick Installation Guide
•
Tools you need
To install the camera, you will need:
12 Vdc power source. See Specifications for wattage requirement.
•
Tools and additional fasteners (may be required) for mounting the camera
•
Phillips #2 screwdriver
•
Video and 12 Vdc power extension cables
•
Installation
Before installation:
Make sure that the device is in good condition and all the assembly parts are included.
•
Check the specification of the products for the installation environment.
•
Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera.
•
To avoid fire or shock hazard, use only UL listed power supplies. Verify that the power supply will
•
provide the rated voltage and wattage for the camera. See the Specifications section.
Trim ring tab (3)
Mounting plate
Trim ring
Slot in mounting plate
for trim ring tab (3)
Mounting side of mounting plate
HD format
select switches
TVI AHD
1 2 1
Down Down Down
Camera drop cables
Drop cable
12 Vdc
connector
Cap
HD Video BNC
connector
CVBS CVI
2 1 2 1 2
Up Up Up Up Down
HDV_T5V_CQ
190708