Table of Contents
Advertisement
b.
Click up or down direction buttons to position the preset to be edited.
Click left/right direction buttons to position the cursor to PRESET, DWELL and SPEED of a preset. Click the up and
c.
down direction buttons to set each value.
The presets you set for a patrol should be the defined presets; dwell time (0-30 seconds) is the time that the camera pauses
NOTE
on the preset; speed is the patrol speed at which the camera switches between presets.
d.
Follow above steps to add other presets to the selected patrol. You can include up to 32 presets in sequence for a
patrol.
Press IRIS+ to save the current settings or press IRIS- to cancel and return to the previous menu.
e.
4.6.2 TASK 2: Preview the patrol
To review a patrol, move the cursor to PREVIEW, then click IRIS+ to preview the current patrol and enable the camera to scan
among the presets. You can click IRIS+ again to stop the preview.
4.6.3 TASK 3: Delete a patrol
To delete a patrol, move the cursor to CLEAR PATH, then click IRIS+ to delete the current patrol.
4.6.4 TASK 4: Call the defined patrol
To call a patrol, use a web browser connected to your DVR to select the corresponding preset number from the drop-down list in
the control panel, then click the icon to call the related patrol. For example, you might call preset 35 to call patrol 1. Refer to "3.2
System-defined Presets" on page 16 to find the preset number for a patrol.
SECTION 4: USING THE OSD MENUS
Edit patrol
36x PTZ IR Outdoor Camera User Manual
37
Advertisement
Table of Contents
