Table of Contents
Advertisement
2.
Choose the privacy mask number:
a.
Move the cursor to BLANK NUM and click IRIS+ to open editing mode.
b.
Click the up and down direction buttons to select a mask number for configuration.
c.
Click IRIS+ again to confirm your selection.
3.
Configure the position and size of the privacy mask.
a.
Move the cursor to SET BLANK and click IRIS+ button to enter the editing mode as shown in the following figure.
You can see a privacy mask on the live window.
b.
When the ADJUST BLANK POS message appears, use the direction buttons to shift the position of the privacy mask.
Privacy BLANK configuration menu
Set the Privacy Mask
36x PTZ IR Outdoor Camera User Manual
SECTION 4: USING THE OSD MENUS
31
Advertisement
Table of Contents
