Table of Contents
Advertisement
SECTION 4: USING THE OSD MENUS
4.4 Configuring PTZ control parameters
You can configure panning, tilting and zooming movements, and configure PTZ control functions including presets, patrols,
patterns, etc. for the camera.
4.4.1 Configuring PTZ parameters
Open the PTZ configuration menu. Go to MAIN MENUS g DOME SETUP g MOTION PARAMETER SETUP
Descriptions of PTZ parameter configuration:
Auto-flip. In manual tracking mode, when a target object moves directly beneath the camera, the camera automatically
•
rotates 90 degrees horizontally (flips) for tracking. The default setting of AUTO-FLIP is ON for this camera model.
Proportional Panning / Tilting. When this function is enabled, the pan/tilt speed changes according to the amount of
•
zoom. If using high zoom, the pan/tilt speed is slowed to keep the image from moving too fast on the live view display. You
can set PROPORTIONAL PAN to ON or OFF to enable/disable the function. This function is enabled automatically while setting
patterns.
Park time and actions
This feature allows the camera to start a predefined action (park action: scan, preset, pattern, etc.) automatically after a period of
inactivity (park time).
You can set PARK TIME from 5 to 720 seconds and set the park action (PARK ACT) as preset 1 to 8, pattern 1 to 4, patrol 1 to 8, pan
scan, tilt scan, random scan, frame scan, panoramic scan, day mode, night mode or none.
30
PTZ PARAMETER SETUP menus
Advertisement
Table of Contents
