Installing The Front System Fan - HP Z600 Maintenance And Service Manual

4. Disconnect the front system fan cable
Figure 5-67
5. Press the two tabs on top of the fan holder/card guide
pull the assembly from the chassis.
6. Carefully push the release tabs on the card guide
shown in the following figure.
Figure 5-68

Installing the front system fan

To install the front system fan, reverse the removal steps.
Place the fan in the card guide and snap it into place. Place the fronts system fan assembly into the
chassis and snap it into place. Connect the font system fan cable to the system board.
ENWW
Removing the front system fan
Removing the fan from the guide
from the system board as shown in the following figure.
, rotate the assembly forward
2
and rotate the fan out of the card guide
Removing and installing components 121
, and then
as
2