Installing The System Fan - HP x4000 Technical Reference Manual

Installing the System Fan

NOTE Ensure that all cables are clear of the fan and will not easily come into
contact with the fan during normal use or following transportation.
1. The fan unit can only be installed in one way. The distance between
2. Gently push the fan downwards until it clicks into place.
3. Connect the fan connector to the system board.
4. Replace the Workstation's cover (refer to page 148). Reconnect all the
Chapter 10
This manual downloaded from http://www.manualowl.com
the two retaining clips is shorter at the top than the bottom. Align the
fan clips with their corresponding holes.
power and telecommunications cables.
Installing or Replacing Parts and Accessories
System Fan
191