Deleting A Power-On Or Setup Password; National Keyboard Delimiter Characters - HP Z600 Maintenance And Service Manual

Deleting a power-on or setup password

To delete a power-on or setup password:
1. Power on or restart the workstation.
2. Choose from the following:
●
To delete the power-on password, go to step 4.
● To delete the setup password, as soon as the workstation is powered on, press and hold
F10
if necessary.
If you do not press F10 at the appropriate time, you must restart the workstation and then
press and hold F10 again to access the utility.
Use the appropriate operating system shutdown process.
3. When the key icon appears, enter the current password followed by a slash (/) or alternative
delimiter character: current password/.
For information about the alternative delimiter characters see
characters on page
4. Press Enter.

National keyboard delimiter characters

Each keyboard meets country-specific requirements. The syntax and keys you use for changing or
deleting passwords depend on the keyboard included with the workstation.
Table 4-3 National keyboard delimiter characters
Language
Arabic
Belgian
BHCSY
*
Brazilian
Chinese
Czech
Danish
French
French
Canadian
German
* Bosnia-Herzegovina, Croatia, Slovenia, and Yugoslavia
ENWW
until you enter the Computer Setup (F10) Utility. Press
57.
Delimiter Language
/ Greek
= Hebrew
- Hungarian
/ Italian
/ Japanese
- Korean
- Latin American
! Norwegian
é Polish
- Portuguese
Delimiter Language
- Russian
. Slovakian
- Spanish
- Swedish/Finnish
/ Swiss
/ Taiwanese
- Thai
- Turkish
- U.K. English
- U.S. English
Enter to bypass the title screen,
National keyboard delimiter
Delimiter
/
-
-
/
-
/
/
.
/
/
Workstation management 57